WordQ 2
To install and use
WordQ v2.5, you need:
- A Windows® PC with 1
GHz or higher processor speed
- Windows® XP, Vista
(32-bit Vista)*
- 512 MB RAM or more
(1GB+ MB preferred with installation of
high quality speech)
- Sound card and
speakers or a headset
*Note: In 64-bit
Vista, WordQ 2.4-2.5 will only function with
32-bit applications such as Microsoft Office
2007 and 32-bit Accessory applications
located under \Program Files\Windows
NT\Accessories.
SpeakQ
To install and use the SpeakQ
plug-in, you need:
- WordQ 2 software
pre-installed
- A Windows PC with 1 GHz or higher
processor speed
- (2+ GHz preferred)
- SpeakQ English v1.5: Windows® XP,
Vista
(32-bit Vista)*(NOTE: Win 98 is
not supported)
- SpeakQ Français v1.5 (Vista Français
seulement)
(32-bit Vista)* (NOTE: Win XP is
not supported)
- 1GB+ MB RAM
- Sound card, noise-canceling
microphone (headset or desktop), and
headset or desktop speakers.
Network and single station
requirements/hardware configuration
WordQ/SpeakQ has been designed
for individual workstations with single or
multiple users. That is, only one user may
run a single installation at a time.
However, that copy of WordQ/SpeakQ
may open and run more than one user
vocabulary file. There are no limits on the
number of user vocabulary files used with
one WordQ/SpeakQ
installation.
WordQ v2.2-2.5 and SpeakQ
v1.2-1.5 may installed with network
support where WordQ/SpeakQ are
installed as part of a master image on a
workstation that is locked down with
DeepFreeze or similar program. In this
situation, all user files (word prediction
and speech recognition) are saved on remote
server in each user’s network workspace
(User drive). See FAQ
WordQ v2.2 and SpeakQ v1.2 Network
Installation. |